Icom
Icom IC-47A UHF 440 MHz 25 Watt FM mobile transceiver with PL Tones, Microphone, Mobile Bracket, Pwr Cord & Manual in Very Good Condition
- MPN:
- IC-47A
- Condition:
- Used
- Shipping:
- $20.00 (Fixed Shipping Cost)
Description
This Icom IC-47A UHF 440 MHz 25 Watt FM mobile transceiver with built in PL Tones, Microphone, Mobile Bracket, Pwr Cord & Manual, is in Very Good Condition.
I tested this radiop on the air and it appears to be working.
The Least Significant display digit will have a segment or two missig but the other gdigits all read in full and you can still tell what frequency you are on.
The Voluum control has a dead spot in it and needs to be at about 3/4 before it seems to work. It may be dirty but it is intermittant and may need some attention.
The microphone, Power Cord, mobile bracket and original manual is worth the price alone.
I am selling it as is as described for parts or repair or to use as it is for the family of a silent key.
The Icom IC-47A is similar to the IC-27A but operates on the 440 MHz band instead of 2 Meters. Power output may be selected at 25 or 5 watts. Operation is from 440-450 MHz. The speaker is built-in. This radio requires 7 Amps. It has 9 memories.
|
|
The Icom IC-27A is a compact 2 meter FM mobile transceiver providing 25 watts of power. There is also a setting for 5 watts output when less power is needed. The backlit LCD display is readable over a wide range of light. This radio has 9 memories. It also has programmed scanning or memory scanning. 32 PL frequencies and speaker are built-in. This radio requires 13.8 VDC at 6.0 amps. The supplied HM-23 DTMF hand mic has Up-Down.
The Icom IC-27H is the same as the IC-27A, but transmits with 45 watts (instead of 25 watts) and requires 9.5 amps. It has a large heat sink in the back
The Icom IC-37A is the same as the IC-27A, but but operates on the 220 MHz band instead of 2 meters with 5 or 25 watts.
The Icom IC-47A is the same as the IC-27A, but operates on the 440 MHz band instead of 2 meters with 5 or 25 watts.