Collins

This Collins 516F-2 Power supply cabinet, is a beautiful Reproduction cabinet with an Aluminum Trim Ring, and Winged emblem Grill. You will be hard pressed to tell this is a reproduction as it looks...

This Collins 55G-1 LF Tuner ( Advanced Optics Kit) Fully is Built, and in Excellent Condition. The 55G-1 Low Frequency Tuner Reproduction is actually a Kit that was sold by Advanced Optics Ltd in...

This  New Leviton Rotary Switch for the Collins 312A-1, 312A-2, and SC-101 Speaker Console, is the Exact Replacement.  These switches on the afore mention speakers are getting old and are...

This Collins Original NEW Push On Fluted Control Knob For S-Line, has the the pointer section which is glued on the back side. It is P/N 543 8044 000. This is the push on style , and will work with a...

This Collins Original NEW Push On Fluted Control Knob For S-Line, does not have the pointer which is glued on the back side. It is P/N 543 8043 000. This is the push on style , and will work with a...

This Collins Original Push On Fluted Control Knob For S-Line, has the the pointer section which is glued on the back side. It is P/N 543 8044 000. This is the push on style , and will work with a 1/4...

This Collins Original used Push On Fluted Control Knob For S-Line, does not have the pointer which is glued on the back side. It is P/N 543 8043 000. This is the push on style , and will work with a...

This Collins NEW Original Push On Pointer Knob, is for the S-Line, 51S-1 and KWM-2 /2A Radios. This is the push on style , and will work with a 1/4 beveled shaft.  The retainer clip is intact...

  *** On Sale *** This Collins  S-Line Project Cabinet with Trim Ring, Feet, Risers. & SS Hardware, is a BRAND NEW cabinet built in the USA.  This Project Cabinet can house, and...

*** On Sale *** This Collins  S-Line WE Project Cabinet with Trim Ring, Feet, Risers. & SS Hardware, is a BRAND NEW Prototype! cabinet built in the USA.  This Project Cabinet can house,...

This Collins (Dubrow) Autotune PTO for the R-392  Receiver, is New in Original Box! It is the same as the Collins 70E-18  P/N 505 1413 004 This is a rare item and a great find!  

This Collins 270G-1 Matching Speaker for the 75A-1 Receiver, is in Excellent Condition. It has the original paint and finish, and looks very nice. The Flocking on the grill has fallen off and it can...

This Collins 270G-3 Matching Speaker for the 75A-2, 75A-3, and 75A-4 Receivers, is in Very Good Condition. It has the original paint, finish, and Flocked Grill. It has the original Jensen speaker...

This RARE Collins 30FXC Transmitter Set of 3, Final Output Coil Set, consists of the 20 Meter 14 FC, 40 Meter 7 FC, & 160 Meter 1.7 FC Plug in Coils. NOTE: Please contact me for payment...

This Collins 30L-1 Cabinet Reproduction with Trim Ring, Feet, Risers. & SS Hardware, looks just like the original! This beautiful reproduction has the original baked on enamel finish that...

This Collins 30L-1 Meter Face, is a NEW FR Radio Reproduction.  The owner of FR Radio  has passed away a few years ago and these reproductions are no longer available. I have only this one...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. It is in nice shape with a few small marks which are hard to see...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to find!...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to find!...

Collins 30S-1, Pointer Knob (One of Two) O-101 or O-102 P/N 544 0777 004 in Excellent Condition This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Front Door for the Collins 30S-1 is complete with the Lock, "Thirt S One" script, and all the hardware like the bottom pins and handle. This Door is in excellent shape. This Collins 30S-1...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to find!

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee.   This panel is in nice shape. There are a few small marks...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier Key for the Front Cabinet Door, was reproduced from an original key. As far as I know this key should fit all of the 30S-1 Amplifiers, with the original lock unless it...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier Original Multi Meter Switch is in excellent condition.

This Wire Harness is not complete but has the color coded wire you may need. This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Antenna Change Over Relay K-101 with Shock Mount, was Pulled from a Working Amplifier that had cosmetic damage from transportation.   This is one of the hardest relays to...

This Collins 30S-1 Peter Dahl 30S-1M Special Order Plate Transformer Replacement has 120 Volts higher Screen Voltage, and will boost the output power.  This transformer belongs to a friend of...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to find!...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. All Contacts are in great shape.  This one has some perf...

This Collins 30S-1, Brand New Lock & Key Assembly, is the Late Style Nickel Finish unit found on Late Round Emblem and Rockwell Collins 30S-1 amplifiers. It will also work on earlier models which...

This Collins 30S-1, Brand New Lock & Key Assembly, is the Late Style Shinny Brass unit found on Late Round Emblem and Rockwell Collins 30S-1 amplifiers. It will also work on earlier models which...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to find!...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1, Brand New Loading Dial (Less Hub) is still in new condition.  You will have to use your Hub to mount this dial on. This is a rare find for a part that has been unavailable...

This Collins 30S-1, Brand New Set of (3) 18 K Ohm Resistors from Power Supply Back Panel R-205,206,207, are the original resistors used in the 30S-1, and have the same part number 710 2133 00...

This Collins 30S-1, Brand New Set of (3) 8.2 Ohm Resistors from of Power Supply Back Panel R-201, 215 is Collins P/N 710 2126 00  This set of 3 resistors are new in the original boxes...

This Collins 30S-1, Brand New Tuning Dial with Hub, is in the Original Package. It is P/N 544 6995 002, and has a late Date Code SEP 28th 1977. This is a rare find for a part that has been...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1, Multi Meter / Ammeter, 200-0-500 ua, M-201, P/N 458 0483 00, is in excellent condition and was removed from a working 30S-1 which was cosmetically damaged.  This is an early...

This Collins 30S-1 Amplifier part, was removed from a working 30S-1 Amplifier. This is a great find !  

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee. This item, as with most Collins 30S-1 parts, is very hard to...

This Collins 30S-1 Amplifier part, was pulled from a working 30S-1 Amplifier, and comes with a money back, satisfaction guarantee.  It looks to be in excellent condition and the band switch...

This Collins 312B-4 & 312B-5 New Screw On Bat Handle, is for S-1 & S-2 Control Switches.  This is a very hard to find part especially new!  

This Collins 312B-4 & 312B-5 New S-1 Normal / Receive / Transmit Lever Switch, is P/N 259 1132 000   This is a very hard to find part especially new in the package. This is for the...

This Collins 312B-4 & 312B-5 Used S-3 Meter Switch is P/N 259 0966 00  This is a very hard to find part   This one is used in excellent condition. This is for the switch assembly...

Collins 312B-5 Console Original New Front Panel

This Collins 32S-1 Escutcheon with shaft Bushing & Cursor window wheels, in Excellent Condition.  

This Collins NEW Capacitor Replacement Kit Includes the custom made, Chassis Mount Multi value Can, as well as the other new, modern capacitors you will need to bring your vintage Collins Radio up to...

This Collins 32S-1, 32S-2, 32S-3 NEW Chassis Mounted Replacement Capacitor Can, is a custom made, nickel plated can, with mounting tabs to fit in the same slots as the original can. It will mount...

This Collins 32S-1, 32S-2, 32S-3 Original NOS Chassis Mounted Capacitor Can, is the original Capacitor Cans found in the 32S Transmitters.  Since it is original and not a custom made capacitor,...

This Collins NEW Capacitor Replacement Kit Includes the custom made, Chassis Mount Multi value Can, as well as the other new, modern capacitors you will need to bring your vintage Collins Radio up to...

This Collins 32V-3 Instruction Manual, is a reproduction of the original manual P/N 520 9570 00 15 April 1952.It has a comb binding. This and every Manual I sell, comes with a money back satisfaction...

This Collins 35C-1 Low Pass Filter for the 32V Series Transmitters, is in Very Condition and provides 75 dB attenuation.  This Filter is probablly the best built low pass filter ever built. It...

This Collins 35C-1 Low Pass Filter for the 32V Series Transmitters, is in Excellent Condition and provides 75 dB attenuation.  This Filter is probablly the best built low pass filter ever built...

This Collins 35C-1 Low Pass Filter for the 32V Series Transmitters, is in Excellent Condition and provides 75 dB attenuation.  This Filter is probablly the best built low pass filter ever built...

This Listing is for (1)  Collins 51-J / R-388 NEW Plug in Chassis Mounted Capacitor Can.  The Original Capacitors are getting very old and leaky and this plug in chassis mounted capacitor,...

This Collins 516F-2 ABS Trim Ring in Excellent Condition Not Yellowed,  and looks as good as a new one.  Many ABS trim Rings turn yellow but this one looks like new!

This Collins 516F-2 (set of 2)  Replacement 8 Henry Chokes for L1 or L2 are BRAND NEW and  Made in the USA. I had a high quality Transformer company make a run of these 8 hry chokes for my...

This Collins 516F-2 Replacement 1 Henry Choke for L3 is BRAND NEW and  Made in the USA. I had a high quality Transformer company make a run of these 1 hry chokes for my company so I can keep...

This Collins 516F-2 Replacement 8 Henry Choke for L1 or L2 is BRAND NEW and  Made in the USA. I had a high quality Transformer company make a run of these 8 hry chokes for my company so I can...

This Collins 516F-2 / 516F-1 Used Main Transformer, is in Excellent Condition and was removed from a working 516F-2 Power supply. When removed, the wireing was kept as long as possible to make...

This Collins 516F-2 DUAL PRIMARY Power Transformer, is custom made in the USA, for a 120/230/240 VAC 50/60 hz Primary. The secondary voltages are the same as factory specifications. NOTE: This...

This Collins NEW Capacitor Replacement Kit Includes the custom made, dual section Capacitor rated 15/30 MFD @ 450 VDC for C5A and C5B, as well as the other new, modern capacitors you will need to...

This Collins 516F-2 NEW Dual Section Capacitor Replacement is rated 15/30 MFD @ 450 VDC for C5A and C5B.Many have recapped their Collins radios with the complete kit I have offered in another listing...

This set of 8, Black Oxide Stainless Steel screws, are the same type used on the Collins 516F-2 power supply and the 312B-3 S-Line Speaker. This set of 8 screws are required for one 312B-3 Speaker...

This set of 4, Black Oxide Stainless Steel screws, are the same type used on the Collins 516F-2 power supply and the 312B-3 S-Line Speaker. (4) screws are required for one 516F-2 Power Supply front...

This Collins 516F-2 Round Emblem Cabinet with ABS Trim Ring, is in Excellent Condition with Original Paint & Finish.  The cabinet and trim ring are free from any bad marks or sctatches and...

This Collins 516F-2 Original Round Emblem Cabinet with metal Trim Ring, is in excellent Condition! The paint and finish are original and there are no bad scratches or marks. It looks...