Drake

This Manual was Re-produced using a State of the Art, Sharp Laser Printer with the High Resolution Scanning option. Each Manual is digitally scanned and all pictures and images are reproduced in the...

This American Made Switchcraft PJ-068 Right Angle Microphone connector with Screw Terminals, is brand new, and is used by Collins, Drake, as well as  Aviation Microphones and headsets.  For...

This RL Drake 2 Pin Standard Microphone Connector is NEW.  The RL Drake part number is 3291052.  It was used with some of their early solid State radios.  This connector was also used...

RL DRAKE 2-B TUBE KIT 1, 6BZ6 1, 6U8 1, 6BF6 1, 8BN8 3, 6BE6/5750 1, 6BA6/5749W 1, 6AQ5/6005 1,6X4 All NOS Tubes,  This kit was purchased from K5SVC and was not used so I am selling it at a...

RL DRAKE 2-C TUBE KIT 1,12BZ6 1, 12AU6, 12BA6 2, 12BE6 All NOS Tubes  This kit was purchased from K5SVC and was not used so I am selling it at a discount. BE SURE TO CHECK YOUR RECEIVER TUBE...

RL Drake 2-NT Transmitter Complete Original Tuning Coil Set of 6 New

This RL Drake A-Line Knob Aluminum Knob Skirt with 0-25 markers, is new old stock and in excellent condition. I am not sure all radios it was used on..I have only a few of these left.

This RL Drake CB Watt Meter Face Plate, was purchased by me from the RL Drake Company when they liquidated their Amateur Radio inventory. It is original, NEW old Stock, and is in perfect condition...

This RL Drake DC-3, 13.8 Volt DC Power Supply is New / Unused.  The original Box was not in good shape but the DC-3 Supply is still in New Condition. I will include the original instruction...

This set of (4) RL Drake Round Feet for AC-4 Power Supply, are New and for use with the AC-4. They have a  stud and will screw into the Drake AC-4 or AC-3 Power supplies to use them stand alone...

Product Description The ES4L4-B is a combination soft-start/soft-key/bias board for the L4-B amplifier.  This all-in-one board limits inrush current during amplifier start-up by...

RL Drake L7 Amplifier All in One, Soft-Start, Soft-Key, & Bias Module Product Description This RL Drake  L7 module, is fully assembled and is a combination soft-start/soft-key/bias...

This RL Drake MN-2000 Inside Cover, is a New Original Drake Part # 480-8095A  

 This Band Switch Bar Knob Replacement with Brass Insert, is a close match for the problematic original knob.  The MN-2000 has a very robust band switch indent. With the Brass insert it...

RL Drake MN-7 New Original Antenna Switch Replacement

This RL Drake NEW MSR-2, DSR-1, DSR-2 Frequency Select Tuning Knob, is a rare find.  It may also be used on other RL Drake receivers.  It is new old stock and is still in new condition. It...

This RL Drake Original Complete B-Line Label Set, is in excellent condition.  This cable set will keep all your cables straight and will prevent damage by the wrong cable in the wrong spot!

This RL Drake Original Complete C-Line Label Set, is in excellent condition.  This cable set will keep all your cables straight and will prevent damage by the wrong cable in the wrong spot!

RL Drake Plate Meter for 4-Line Transmitters From a Working Transmitter  This meter is used in the T-4XC and T-4XB Transmitters.

RL Drake Plate Meter for 4-Line Transmitters New old Stock.  This meter is used in the T-4XC and T-4XB Transmitters.

RL Drake PS-7 Power Supply, 10 Pin Jones Connector and Cable to Plug into TR-7 / TR-7A / TR-5

This RL DRAKE R-4A TUBE KIT (14 TUBE VERSION). 1-0B2, 1-6EH5, 1-6KZ8, 4-12BA6, 1-12BE6, 1-12AV6, 1-12BZ6, 1-6HS6, 1-12AX7, 1-6GK6, 1-6AU6. has ALL NEW NOS TUBES  This kit was purchased from...

This RL Drake R-4B Receiver for the B-Line in Very Good Condition, is Very Clean, and Needs Minor Work S/N 9862.  I tested this receiver on the air and it appears to be working but the receive...

This RL Drake R-4C Set single Original Filter Cover, is for the Rear Panel. It is in excellent Condition. The two mounting screws are included.

This RL Drake R-4C Set single Original Filter Cover, is for the Rear Panel. It is in excellent Condition. The two mounting screws are included.

This RL Drake R-4C Set single Original Filter Cover, is for the Rear Panel. It is in excellent Condition. The two mounting screws are included.

This RL Drake R-4C Set single Original Filter Cover, is for the Rear Panel. It is in excellent Condition. The two mounting screws are included.

This RL Drake R-4C Set of 3 Original Filter Covers, are for the Rear Panel.  They are in excellent Condition. The six mounting screws are included.

This RL Drake R-4C Set of 3 Original Filter Covers, are for the Rear Panel.  They are in excellent Condition. The six mounting screws are included.

This RL Drake R-4C Original Crystal Cover for the Rear Panel, is in Excellent Condition. The two mounting screws are included.

This RL Drake R-4C Original Crystal Cover for the Rear Panel, is in Very Good Condition. The two mounting screws are included.

This RL Drake R-4C Original Noise Blanker Jumper Plug, is used when the optional noise blanker board is not installed.  It is factory wired for the R-4C but it can be reconfigured for the TR-4...

This RL Drake RARE Q-Xer Model 592 Q-Multiplier, is made for Receivers with a 262 KC IF. It is in Excellent Condition. I have not used it or tested it but it looks to be in great shape. I will...

RL Drake Plate Meter for 4-Line Transmitters From a Working Transmitter  This meter is used in the T-4XC and T-4XB Transmitters.

This RL Drake SPR-4 AC Power Cord, is New Old Stock.  This is a very rare item to find!

RL Drake SW-4 Custom Embroidered Dust Cover

This RL Drake SWR Calculator Reproduction for the W4 Wattmeter, is required to calculate the forward and reflected power measured with the Drake W4 Wattmeter. The W4 meter originally came with a...

This RL Drake T-4XB Transmitter for the B-Line, is in Very Good Condition, very clean, and Needs Minor Work S/N 17248  I tested this transmitter on SSB and it put out about 80 Watts on 80 meters...

This RL Drake TR-4C Original Noise Blanker Jumper Plug, is used when the optional noise blanker board is not installed.  It is factory wired for the TR-4C but it can be reconfigured for the R-4C...

This Rare RL Drake TR-7 / TR-7A  13.8 VDC DC Fused Power Connection & Noise Filter Module, mounts on the back of a TR-7 where the optional fan would mount.   This unit provides a...

This RL Drake TR-7 / TR-7A / PS-7 Cover Plate (fits where the FA-7 Fan is mounted)   If you want to remove the FA-7 Fan you will need this plate to cover the hole.

RL Drake TV-1000-LP 1000 Watt Continuous Below 30 MHz.  It is used and in very good condition.

RL Drake TV-3300-LP 1000 Watt Continuous Below 30 MHz.  It is lightly used and in excellent condition.

This RL Drake TV-3300-LP Low Pass Filter is rated 1000 Watts Continuous Below 30 MHz. It is As New in the Original Box.  Drake Low Pass Filters are amoung the best made.

This RL Drake TV-42-LP Low Pass Filter is rated 100 Watt Continuous Below 30 MHz This is the Smaller version LPF  Drake Low Pass Filters are amoung the best made.