HF

This Custom made Aluminum Milled, Antenna Capacity Top Hat Clamp Assembly, consists of two Aluminum plates that measure   4 3/8 inch diameter. Each plate is milled out to accept 5/16 inch radials and is about 1/4 inch thick.  With more...

This Comet CF-706 HF-6M/2M-440MHz duplexer for the IC-706/MKII/G, FT-100, etc. appears to be new and in excellent condition. CF-706A HF-6M/2M-440MHz duplexer for the IC-706/MKII/G, FT-100, etc.. To match the RX freq range of the IC-706MKII/G...

This Hustler Magnet Mount mount with Standard 3/8 thread mount, is for Medium size antennas. It is in excellent condition.

This is the McKay Dymek DA-100 is a quality, general coverage active receiving antenna (not for transmit). I have only the Control Box and not the antenna that mounts inside or outside. It is untested but looks to be in nearly new condition...

This Mobile Antenna Spring for medium size antennas with 3/8 threads and Stud, has a standard 3/8 stud on one side and female threads on the other side.It is 3 1/4 inches long including the stud and it is 1 inch in diameter.This spring is suitable for...

This Palomar (NEW) BA-2000, 5KW (continuous) 1:1 Balun made to mount on the Boom of Beam Antennas , was purchased and was never used. It will also work for Dipole antennas. Decoupling the feed line from the antenna is very important to reduce RFI...