Icom IC-751A Quad Conversion General Coverage HF Transceiver in Excellent Condition, with New Pexx Bios Board and built in Optional Power Supply

This Icom IC-751A Quad Conversion General Coverage HF Transceiver, is in Excellent Cosmetic Condition. It has had a replacement Pexx Bios Board installed.

 This should insure many years of trouble free operation.

 This one also has the optional built in IC-PS-35 power supply.

NOTE: the pictures of this rig were taken before the IC-PS-35 power supply was installed.

 The Icom HM-36 matching hand microphone, a brand new original Icom 13.8 VDC power cord, AC power cord, and original manual is all included.

The small plate removed to install the internal PS-35 power supply, is also included in case for some reason you want to remove the PS-35.

  The radio works great and there are no signs of any trouble.

This radio is super clean with no bad marks or scratches.

 A Power cord is included.

 I am selling this beautiful transceiver as is, as described for a friend. 

This item is part of Bill Shadid's collection (W9MXQ)   Bill has been collecting fine vintage gear for many years, always looking for the cleanest and nicest of each model. 

 He has decided to sell some of the gear to free up more room, (Hopefully for more Gear!)  Bill writes articles about vintage Amateur radio gear and is an excellent Technician.

 All his gear has been recently tested and checked for functionality before being delivered to me, to offer on my website.

The Icom IC-751A is an advanced transceiver covering 160 to 10 meters. It features a high performance 100 kHz to 30 MHz general coverage receiver built in. Output is 10 to 100 watts SSB/CW/RTTY/FM modes (10 to 40 watts AM). The 751A has sophisticated capabilities such as:  dual digital VFOs, all-mode squelch, Notch, Passband Tuning, RIT/XIT and attenuator. You also get 32 memories. The two color flourescent digital display is easy to read. Serious CW operators will appreciate the built-in electronic keyer, standard FL-32A 500 Hz CW filter, sidetone, plus full and semi break-in capability. The rear panel has an SO-239 antenna jack plus a receive only RCA phono jack. This radio requires 13.8 VDC at 20 Amps. 12 x 4.5 x 14 inches (306x115x355 mm). This radio comes with the HM-12 hand mic.