Ten-Tec
Ten-Tec 262, 20 Amp 13.8 VDC Deluxe Power Supply / Speaker with VOX Option for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers in Excellent Condition
- MPN:
- 262
- Condition:
- Used
- Shipping:
- $35.00 (Fixed Shipping Cost)
Description
This Ten-Tec 262, 20 Amp 13.8 VDC Deluxe Power Supply / Speaker with VOX Option for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers. it is in Very Good Condition.
This is one of the few Ten-Tec Power supplies that has a detatchable power cord which is included as well as the manual sheets.
This one has the 6 pin Jones detatchable power cord. If you need the later style 4 Pin Connector, I have them in stock and they are simple to instal.
This power supply is from a Ten-Tec Collector who is selling his Collection due to a planned move.
As with most of his gear, much of it has very few working hours of use.
I have tested this power supply with a Transceiver and it works fine with no problems.
I did not check the VOX operation
I am selling it as is as described, due to the age and weight, I will not accept returns.
Description
For use with Models 540 and 544. Fully voltage regulated to provide highly stable, pure DC (20 Amps) from 117 VAC. . Instantaneous overload protection circuit prevents damage caused by excessive current drain; reset by momentary turn-off. Includes a complete VOX system. VOX controls are located on front panel. Low frequency components invoice below cut-off frequency of speaker actuate T/R function.
Specifications
-
Input Voltage: 117 VAC, 50-60 Hz
-
Output Voltage: 13 VDC +/- 0.5 V
-
Regulation: Better than 1% no load to full load @ 117 VAC
-
Output Current: Zero to 18 A,
-
Ripple: Less than 60 mV p-p @ 18 A and 117 VAC
-
Circuit Breaker: Trips at 20 A (manual reset)
-
Output Connections: One 6-pin Jones type. Two Phono Jacks for low current.
-
Finish: Satin aluminum front panel, black pebble-grain sides and top.
-
Semiconductors: 4 transistors, 1 SCR, 7 diodes
-
Size: HWD 4.5" x 8.25" x 13"
-
Weight: 15 lbs
VOX Specifications
-
Mic Input Impedance: Greater than 3 megohms for crystal, ceramic, or hi-Z dynamic microphones
-
Transmitter Microphone Channel Gain: Unity
-
Maximum Microphone Input Level: 250 mV, rms
-
VOX Sensitivity: Less than 1 mV @ 200 Hz trips T/R
-
Delay: Adjustable from 0.1 to 1 sec.
-
Semiconductors: 1 IC, 10 transistors, 3 diodes
Related Products
Ten-Tec 262 G, 20 Amp 13.8 VDC Deluxe Power Supply / Speaker with VOX Option for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers in Excellent Condition #1
Ten-Tec
Ten-Tec 262 M, 20 Amp 13.8 VDC Deluxe Power Supply with Ammeter & VOX Option for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers in Excellent Condition #1
Ten-Tec
Ten-Tec 262 M, 20 Amp 13.8 VDC Deluxe Power Supply with Ammeter & VOX Option for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers in Excellent Condition #2
Ten-Tec
Ten-Tec 261, 10 Amp 13.8 VDC Deluxe Power Supply / Speaker with VOX Option for the 540 Triton I Transceiver and will work with Most Other Transceivers in Good Condition
Ten-Tec
Ten-Tec 252 M, 20 Amp 13.8 VDC Power Supply with Ammeter for the 540 & 544 Triton Series Transceivers and will work with Most Other Transceivers in Excellent Condition #1
Ten-Tec