Featuring Fine Vintage and Modern Amateur Radio Gear For Sale

Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202

Write a Review
MPN:
280
Condition:
Used
Shipping:
$45.00 (Fixed Shipping Cost)
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
  • Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202
$79.99
Frequently bought together:

Description

This Ten-Tec 280, 20 Amp 13.8 VDC Power Supply for the Delta & Corsair and will work with Most Other Transceivers in Very Good Condition S/N 280 02202

 

 This power supply is from a Ten-Tec Collector who is selling his Collection due to a planned move. 

As with most of his gear, much of it has very few working hours of use.

 I have tested this power supply with a Transceiver and it works fine with no problems.

The cabinet has been repainted the same original color and looks pretty good.

Description

Ideal for powering the Delta 580 and CORSAIR Model 560 transceiver on either 115 or 230 VAC, 50-60 Hz. Easy to change for either primary voltage. Regulated output, over-voltage and over-current protected, and can be switched from transceiver or power supply. Same circuitry as the Model 255, but with dual primary and without the build-in speaker.

Specifications

  • Input Voltage: 105 - 125 VAC, 50-60 Hz or 210 - 250 VAC, 50-60 Hz
  • Output: 13.5 VDC +/- 0.5 VDC.
  • Regulation: Better than 1% no load to full load at 117 VAC.
  • Output Current: 18 amperes, full load; 20 amperes, maximum.
  • Ripple: Less than 60 mV peak-to-peak at 18A at 117 VAC.
  • Circuit Breaker: Electronic latching. Factory set at 20A.
  • Over-Voltage Protection: Trips above 16V output.
  • Panel Meter: 0 - 25 amperes.
  • Connections: Attached 3' cable with four pin AMP MATE-N-LOC connector for high current and remote on/off switching. Two phono connectors for low current output.
  • Finish: Dark painted front panel, dark textured top and sides.
  • Size: HWD 5.5" x 7" x 12".
  • Wt: 15 lbs.
View AllClose

Related Products