Collins R-392 / URR Original 9 Pin Power Connector NEW

This Collins R-392/URR Amphphenol "UW 1220FB23" original power connector, is New old stock, and in excellent condition.

This hard to find power, audio and control connector, is used with the R-392 / URR (J-103)This (9) connector plug is also used with other Military Receivers as well.I have only a few left and they may have some marks or small scratches.

The J103 connector is used to provide power to the R-392 receiver and to provide control of the optional companion T-195 transmitter. Pin Signal Description: (A) 28 V B+ (Positive voltage) This powers the tube plates. The current requirement is 0.5 A. (B) Break-in relay control This signal is provided by the transmitter to engage relays in the receiver to disable the audio output and antenna input when transmitting. This signal is ignored when the receiver Function switch is in the NET position to allow simultaneous use of the transmitter and receiver. (C) Microphone Provided to the transmitter from pin C on the AUDIO connectors. (D) 28 V Filament (Positive voltage) This supplies the tube filaments and draws approximately 2.5 A. (E) Ground (F) Push to talk switch on microphone or Key Passed to the transmitter from pin F on the AUDIO connectors. (H) AF output This is the 600 ohm audio output from the receiver and is common with pins A and L on the AUDIO connectors. (J) No connection (K) Carrier relay control This signal is also available at pin K on the AUDIO connector and is grounded by the receiver when the audio output is not squelched. Because they have been around for a while there may be some light marks in the finish,